View IRF6715MPBF-15_8924972.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.irf.com 1 02/16/11 irf6715mpbf irf6715mtrpbf directfet power mosfet applicable directfet outline and substrate outline (see p.7,8 for details) fig 1. typical on-resistance vs. gate voltage

fig 2. typical total gate charge vs gate-to-source voltage click on this section to link to the appropriate technical paper. click on this section to link to the directfet website. surface mounted on 1 in. square cu board, steady state. t c measured with thermocouple mounted to top (drain) of part. repetitive rating; pulse width limited by max. junction temperature. starting t j = 25c, l = 0.56mh, r g = 25 ? , i as = 27a. rohs compliant and halogen free low profile (<0.6 mm) dual sided cooling compatible ultra low package inductance optimized for high frequency switching ideal for cpu core dc-dc converters optimized for sync. fet socket of sync. buck converter low conduction and switching losses compatible with existing surface mount techniques 100% rg tested sq sx st mq mx mt mp directfet isometric description the irf6715mpbf combines the latest hexfet? power mosfet silicon technology with the advanced directfet tm packaging to achieve the lowest on-state resistance in a package that has the footprint of a so-8 and only 0.6 mm profile. the directfet package is compatible with existing layout geometries used in power applications, pcb assembly equipment and vapor phase, infra-red or convection sol dering techniques, when application note an-1035 is followed regarding the manufacturing methods and processes. the directfet package allows dual sided cooling to maximize thermal transfer in power systems, improving previous best thermal resistance by 80%. the irf6715mpbf balances both low resistance and low charge along with ultra low package inductance to reduce both conduction a nd switching losses. the reduced total losses make this product ideal for high efficiency dc-dc converters that power the latest g eneration of processors operating at higher frequencies. the irf6715mpbf has been optimized for parameters that are critical in synchronous buck including rds(on), gate charge and cdv/dt-induced turn on immunity. the irf6715mpbf offers particularly low rds(on) and high cd v/dt immunity for synchronous fet applications . 2 4 6 8 10 12 14 16 18 20 v gs, gate -to -source voltage (v) 0 1 2 3 4 t y p i c a l r d s ( o n ) ( m ? ) i d = 34a t j = 25c t j = 125c v dss v gs r ds(on) r ds(on) 25v max 20v max 1.3m ? @ 10v 2.1m ? @ 4.5v absolute maximum ratin g s parameter units v ds drain-to-source voltage v gs gate-to-source voltage i d @ t a = 25c continuous drain current, v gs @ 10v i d @ t a = 70c continuous drain current, v gs @ 10v i d @ t c = 25c continuous drain current, v gs @ 10v i dm pulsed drain current e as single pulse avalanche energy mj i ar avalanche current a max. 27 180 270 20 25 34 200 a v 27 q g tot q gd q gs2 q rr q oss v gs(th) 40nc 12.0nc 5.3nc 37nc 26nc 1.9v 0 20406080100120 q g total gate charge (nc) 0.0 2.0 4.0 6.0 8.0 10.0 12.0 14.0 v g s , g a t e - t o - s o u r c e v o l t a g e ( v ) v ds = 20v v ds = 13v i d = 27a

2 www.irf.com pulse width 400s; duty cycle 2% static @ t j = 25c (unless otherwise specified) parameter min. typ. max. units bv dss drain-to-source breakdown voltage 25 ??? ??? v ? v dss / ? t j breakdown voltage temp. coefficient ??? 17 ??? mv/c r ds(on) static drain-to-source on-resistance ??? 1.3 1.6 m ? ??? 2.1 2.7 v gs(th) gate threshold voltage 1.4 1.9 2.4 v ? v gs(th) / ? t j gate threshold voltage coefficient ??? -6.2 ??? mv/c i dss drain-to-source leakage current ??? ??? 1.0 a ??? ??? 150 i gss gate-to-source forward leakage ??? ??? 100 na gate-to-source reverse leakage ??? ??? -100 gfs forward transconductance 135 ??? ??? s q g total gate charge ??? 40 59 q gs1 pre-vth gate-to-source charge ??? 12 ??? q gs2 post-vth gate-to-source charge ??? 5.3 ??? nc q gd gate-to-drain charge ??? 12 ??? q godr gate charge overdrive ??? 11 ??? see fig. 15 q sw switch charge (q gs2 + q gd ) ??? 17 ??? q oss output charge ??? 26 ??? nc r g gate resistance ??? 1.1 2.0 ? t d(on) turn-on delay time ??? 20 ??? t r rise time ??? 31 ??? ns t d(off) turn-off delay time ??? 16 ??? t f fall time ??? 12 ??? c iss input capacitance ??? 5340 ??? c oss output capacitance ??? 1280 ??? pf c rss reverse transfer capacitance ??? 600 ??? diode characteristics parameter min. typ. max. units i s continuous source current (body diode) i sm pulsed source current (body diode) v sd diode forward voltage ??? ??? 1.0 v t rr reverse recovery time ??? 28 42 ns q rr reverse recovery charge ??? 37 56 nc di/dt = 200a/s t j = 25c, i s = 27a, v gs = 0v showing the integral reverse p-n junction diode. v gs = 4.5v, i d = 27a t j = 25c, i f = 27a v gs = 4.5v i d = 27a v gs = 0v v ds = 13v i d = 27a v dd = 13v, v gs = 4.5v v gs = 20v v gs = -20v conditions v gs = 0v, i d = 250a reference to 25c, i d = 1ma v gs = 10v, i d = 34a v ds = 20v, v gs = 0v v ds = 13v v ds = 20v, v gs = 0v, t j = 125c v ds = 13v, i d = 27a conditions see fig. 17 ? = 1.0mhz v ds = 16v, v gs = 0v v ds = v gs , i d = 100a 270 ??? ??? 98 a ??? ??? mosfet symbol r g = 1.8 ?

www.irf.com 3 fig 3. maximum effective transient thermal impedance, junction-to-ambient used double sided cooling , mounting pad with large heatsink. mounted on minimum footprint full size board with metalized back and with small clip heatsink.
r is measured at t j of approximately 90c . surface mounted on 1 in. square cu (still air).
with small clip heatsink (still air) mounted on minimum footprint full size board with metalized back and with small clip heatsink (still air) absolute maximum ratin g s parameter units p d @t a = 25c power dissipation p d @t a = 70c power dissipation p d @t c = 25c power dissipation t p peak soldering temperature t j operating junction and t stg storage temperature range thermal resistance parameter typ. max. units r ja junction-to-ambient ??? 45 r ja junction-to-ambient 12.5 ??? r ja junction-to-ambient 20 ??? r jc junction-to-case ??? 1.6 r j-pcb junction-to-pcb mounted 1.0 ??? linear derating factor w/c max. 78 2.8 c/w w c 1.8 0.022 270 -40 to + 150 1e-006 1e-005 0.0001 0.001 0.01 0.1 1 10 100 t 1 , rectangular pulse duration (sec) 0.001 0.01 0.1 1 10 100 t h e r m a l r e s p o n s e ( z t h j a ) 0.20 0.10 d = 0.50 0.02 0.01 0.05 single pulse ( thermal response ) notes: 1. duty factor d = t1/t2 2. peak tj = p dm x zthja + tc ri (c/w) i (sec) 2.773 0.00418 24.841 0.053914 17.387 8.86912 j j 1 1 2 2 3 3 r 1 r 1 r 2 r 2 r 3 r 3 ci= i / ri ci= i / ri a a

4 www.irf.com fig 5. typical output characteristics fig 4. typical output characteristics fig 6. typical transfer characteristics fig 7. normalized on-resistance vs. temperature fig 8. typical capacitance vs.drain-to-source voltage fig 9. typical on-resistance vs. drain current and gate voltage 0.1 1 10 100 1000 v ds , drain-to-source voltage (v) 0.001 0.01 0.1 1 10 100 1000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) vgs top 10v 5.0v 4.5v 4.0v 3.5v 3.0v 2.8v bottom 2.5v 60s pulse width tj = 25c 2.5v 0.1 1 10 100 1000 v ds , drain-to-source voltage (v) 0.1 1 10 100 1000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) 2.5v 60s pulse width tj = 150c vgs top 10v 5.0v 4.5v 4.0v 3.5v 3.0v 2.8v bottom 2.5v 1 2 3 4 5 v gs , gate-to-source voltage (v) 0.1 1 10 100 1000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) t j = 150c t j = 25c t j = -40c v ds = 15v 60s pulse width -60 -40 -20 0 20 40 60 80 100 120 140 160 t j , junction temperature (c) 0.5 1.0 1.5 2.0 t y p i c a l r d s ( o n ) ( n o r m a l i z e d ) i d = 34a v gs = 10v v gs = 4.5v 1 10 100 v ds , drain-to-source voltage (v) 100 1000 10000 100000 c , c a p a c i t a n c e ( p f ) v gs = 0v, f = 1 mhz c iss = c gs + c gd , c ds shorted c rss = c gd c oss = c ds + c gd c oss c rss c iss 0 40 80 120 160 200 i d , drain current (a) 0 4 8 12 16 20 t y p i c a l r d s ( o n ) ( m ? ) t j = 25c vgs = 3.5v vgs = 4.0v vgs = 4.5v vgs = 5.0v vgs = 8.0v vgs = 10v

www.irf.com 5 fig 13. typical threshold voltage vs. junction temperature fig 12. maximum drain current vs. case temperature fig 10. typical source-drain diode forward voltage fig11. maximum safe operating area fig 14. maximum avalanche energy vs. drain current 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 v sd , source-to-drain voltage (v) 0 1 10 100 1000 i s d , r e v e r s e d r a i n c u r r e n t ( a ) t j = 150c t j = 25c t j = -40c v gs = 0v -75 -50 -25 0 25 50 75 100 125 150 t j , temperature ( c ) 0.5 1.0 1.5 2.0 2.5 3.0 t y p i c a l v g s ( t h ) g a t e t h r e s h o l d v o l t a g e ( v ) i d = 100a i d = 250a i d = 1.0ma i d = 1.0a 25 50 75 100 125 150 starting t j , junction temperature (c) 0 100 200 300 400 500 600 700 800 900 e a s , s i n g l e p u l s e a v a l a n c h e e n e r g y ( m j ) i d top 2.74a 3.70a bottom 27a 25 50 75 100 125 150 t c , case temperature (c) 0 20 40 60 80 100 120 140 160 180 200 i d , d r a i n c u r r e n t ( a ) 0.01 0.10 1.00 10.00 100.00 v ds , drain-to-source voltage (v) 0.01 0.1 1 10 100 1000 10000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) operation in this area limited by r ds (on) t a = 25c t j = 150c single pulse 100sec 1msec 10msec dc

6 www.irf.com fig 15a. gate charge test circuit fig 15b. gate charge waveform fig 16b. unclamped inductive waveforms t p v (br)dss i as fig 16a. unclamped inductive test circuit fig 17b. switching time waveforms fig 17a. switching time test circuit r g i as 0.01 ? t p d.u.t l v ds + - v dd driver a 15v 20v vds vgs id vgs(th) qgs1 qgs2 qgd qgodr 1k vcc dut 0 l s 20k v ds 90% 10% v gs t d(on) t r t d(off) t f
1 0.1 %
+ -

www.irf.com 7 fig 18. for hexfet power mosfets ? ? ? p.w. period di/dt diode recovery dv/dt ripple 5% body diode forward drop re-applied voltage reverse recovery current body diode forward current v gs =10v v dd i sd driver gate drive d.u.t. i sd waveform d.u.t. v ds waveform inductor curent d = p. w . period
+ - + + + - - - ? !" # $ ? ! % &'&& ? # (( ? &'&& ) ! '

!

!"#$%& &'()%* ' (( % )& * g = gate d = drain s = source d d d d g s s

8 www.irf.com

!"#$%& &'()%*' (( % )& *
!
" min 0.246 0.189 0.152 0.014 0.027 0.027 0.054 0.032 0.015 0.035 0.090 0.0235 0.0008 0.003 max 0.250 0.201 0.156 0.018 0.028 0.028 0.056 0.033 0.017 0.039 0.095 0.0274 0.0031 0.007 min 6.25 4.80 3.85 0.35 0.68 0.68 1.38 0.80 0.38 0.88 2.28 0.616 0.020 0.08 max 6.35 5.05 3.95 0.45 0.72 0.72 1.42 0.84 0.42 1.01 2.41 0.676 0.080 0.17 code a b c d e f g h j k l m r p dimensions metric imperial logo gate marking batch number part number date code line above the last character of the date code indicates "lead-free"

www.irf.com 9 data and specifications subject to change without notice. this product has been designed and qualified for the consumer market. qualification standards can be found on ir?s web site. ir world headquarters: 233 kansas st., el segundo, california 90245, usa tel: (310) 252-7105 tac fax: (310) 252-7903 visit us at www.irf.com for sales contact information . 02/2011

#
$

%&

loaded tape feed direction min 7.90 3.90 11.90 5.45 5.10 6.50 1.50 1.50 note: controlling dimensions in mm code a b c d e f g h max 8.10 4.10 12.30 5.55 5.30 6.70 n.c 1.60 min 0.311 0.154 0.469 0.215 0.201 0.256 0.059 0.059 max 0.319 0.161 0.484 0.219 0.209 0.264 n.c 0.063 dimensions metric imperial standard option (qty 4800) min 330.0 20.2 12.8 1.5 100.0 n.c 12.4 11.9 code a b c d e f g h max n.c n.c 13.2 n.c n.c 18.4 14.4 15.4 min 12.992 0.795 0.504 0.059 3.937 n.c 0.488 0.469 max n.c n.c 0.520 n.c n.c 0.724 0.567 0.606 metric imperial tr1 option (qty 1000) imperial min 6.9 0.75 0.53 0.059 2.31 n.c 0.47 0.47 max n.c n.c 12.8 n.c n.c 13.50 12.01 12.01 min 177.77 19.06 13.5 1.5 58.72 n.c 11.9 11.9 metric max n.c n.c 0.50 n.c n.c 0.53 n.c n.c reel dimensions note: controlling dimensions in mm std reel quantity is 4800 parts. (ordered as irf6715mtrpbf). for 1000 parts on 7" reel, order irf6715mtr1pbf

▲Up To Search▲

Price & Availability of IRF6715MPBF-15

	To Download IRF6715MPBF-15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .